Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
A handmade ceramic switch cover designed to bring a simple, tactile detail to an everyday electrical fitting.
The cover has a clean 9 × 9 cm form with a small central opening for a toggle lever. It is designed to be used with the Vectis single toggle switch mechanism or similar compatible toggle mechanisms.
Please note: this listing is for the ceramic cover only. The electrical switch mechanism and toggle are not included.
Details
Handmade ceramic
Approx. 9 × 9 cm
Central opening: 10 × 15 mm
Designed for use with the Vectis single toggle mechanism or similar
Cover only — electrical components are not included
Each piece is handmade, so subtle variations in shape, thickness and glaze are part of the finished piece
Installation
The ceramic cover is designed to sit over the existing switch mechanism. For installation, we suggest using a strong, suitable double-sided mounting tape between the ceramic cover and the wall/frame.
Please check the dimensions of your chosen switch mechanism against the measurements above before ordering. The central opening must allow the toggle to move freely without touching the ceramic.
Electrical components should be installed and connected by a qualified electrician. The ceramic cover itself does not replace or modify the electrical switch mechanism.
Compatible mechanism shown: Vectis single switch, 1-gang 1-way or 1-gang 2-way, toggle version.
Made to order, allow 4 weeks making time.
A handmade ceramic switch cover designed to bring a simple, tactile detail to an everyday electrical fitting.
The cover has a clean 9 × 9 cm form with a small central opening for a toggle lever. It is designed to be used with the Vectis single toggle switch mechanism or similar compatible toggle mechanisms.
Please note: this listing is for the ceramic cover only. The electrical switch mechanism and toggle are not included.
Details
Handmade ceramic
Approx. 9 × 9 cm
Central opening: 10 × 15 mm
Designed for use with the Vectis single toggle mechanism or similar
Cover only — electrical components are not included
Each piece is handmade, so subtle variations in shape, thickness and glaze are part of the finished piece
Installation
The ceramic cover is designed to sit over the existing switch mechanism. For installation, we suggest using a strong, suitable double-sided mounting tape between the ceramic cover and the wall/frame.
Please check the dimensions of your chosen switch mechanism against the measurements above before ordering. The central opening must allow the toggle to move freely without touching the ceramic.
Electrical components should be installed and connected by a qualified electrician. The ceramic cover itself does not replace or modify the electrical switch mechanism.
Compatible mechanism shown: Vectis single switch, 1-gang 1-way or 1-gang 2-way, toggle version.
Made to order, allow 4 weeks making time.