Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
A responsive glaze that shifts beautifully across clay bodies—settling into deep mustard yellow tones on stoneware and more vibrant on porcelain. It pools richly in carvings and textures, while delicate crackle lines emerge as the surface cools, adding quiet movement and depth.
1240–1280°C
≈ 2264–2336°F
Cone 7–9 equivalent
Lead-free • Cadmium-free
Suitable for high-fired stoneware and porcelain.
Begin with a 1:1 water-to-powder ratio.
Sieve thoroughly.
Adjust with a small amount of extra water until the glaze reaches your preferred consistency.
IMPORTANT:
You MUST mix the entire dry bag at once.
Because this glaze is hand-blended, partial mixing can cause uneven ingredient distribution and inconsistent firing results.
Yield reference:
500 g (≈ 1.1 lb) → approx. 800 ml (≈ 27 fl oz) liquid glaze.
• Apply an even, consistent coat by dipping, brushing, pouring, or spraying.
• Crackle patterns vary with thickness, cooling speed, and clay body.
• For functional ware, be mindful that crackle surfaces do craze intentionally.
• Do not ingest.
• Wear gloves when mixing or applying.
• Avoid contact with eyes; rinse thoroughly if contact occurs.
• Prevent glaze dust — never sweep dry material; clean with a wet cloth only.
• Ensure good ventilation during firing.
Navigating special-effect glazes can be magical — and unpredictable.
Explore considerations, tips, and best practices here:
A responsive glaze that shifts beautifully across clay bodies—settling into deep mustard yellow tones on stoneware and more vibrant on porcelain. It pools richly in carvings and textures, while delicate crackle lines emerge as the surface cools, adding quiet movement and depth.
1240–1280°C
≈ 2264–2336°F
Cone 7–9 equivalent
Lead-free • Cadmium-free
Suitable for high-fired stoneware and porcelain.
Begin with a 1:1 water-to-powder ratio.
Sieve thoroughly.
Adjust with a small amount of extra water until the glaze reaches your preferred consistency.
IMPORTANT:
You MUST mix the entire dry bag at once.
Because this glaze is hand-blended, partial mixing can cause uneven ingredient distribution and inconsistent firing results.
Yield reference:
500 g (≈ 1.1 lb) → approx. 800 ml (≈ 27 fl oz) liquid glaze.
• Apply an even, consistent coat by dipping, brushing, pouring, or spraying.
• Crackle patterns vary with thickness, cooling speed, and clay body.
• For functional ware, be mindful that crackle surfaces do craze intentionally.
• Do not ingest.
• Wear gloves when mixing or applying.
• Avoid contact with eyes; rinse thoroughly if contact occurs.
• Prevent glaze dust — never sweep dry material; clean with a wet cloth only.
• Ensure good ventilation during firing.
Navigating special-effect glazes can be magical — and unpredictable.
Explore considerations, tips, and best practices here:
