Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Especially striking on grey stoneware, this glaze settles into a balanced brown-rust matte with a grounded, natural character.
Its excellent stability makes it a reliable choice for functional pieces and repeatable production firings.
A dependable surface you can return to again and again as your work evolves.
1240–1280°C (Cone 7–9, ≈2265–2336°F)
For the look seen in my work, I recommend firing to 1260°C (Cone 8, ≈ 2300°F).
Suitable for high-fired stoneware and porcelain.
Lead-free • Cadmium-free
SAMPLE glaze package — 100 g (≈ 3.5 oz / 0.22 lb)
To prepare, add water at approximately a 1:1 ratio.
This sample size is enough for testing on one test tile and a few small pieces.
Start with 1:1 water-to-powder ratio.
Sieve thoroughly.
Add small amounts of water to refine thickness as needed.
Important:
Mix the entire dry bag at once — because the glaze is blended by hand, ingredients are not fully uniform until the full mix is slurried.
Yield example:
500 g (≈ 1.1 lb) of dry glaze = approx. 800 ml (≈ 27 fl oz) liquid glaze.
Apply an even layer. Suitable for:
• dipping
• brushing
• spraying
• pouring
• Do not ingest.
• Wear gloves when mixing or applying.
• Keep away from eyes; rinse thoroughly if contact occurs.
• Avoid breathing glaze dust; never sweep dry powder.
• Clean dried glaze with a wet cloth only.
• Ensure good ventilation during firing.
Especially striking on grey stoneware, this glaze settles into a balanced brown-rust matte with a grounded, natural character.
Its excellent stability makes it a reliable choice for functional pieces and repeatable production firings.
A dependable surface you can return to again and again as your work evolves.
1240–1280°C (Cone 7–9, ≈2265–2336°F)
For the look seen in my work, I recommend firing to 1260°C (Cone 8, ≈ 2300°F).
Suitable for high-fired stoneware and porcelain.
Lead-free • Cadmium-free
SAMPLE glaze package — 100 g (≈ 3.5 oz / 0.22 lb)
To prepare, add water at approximately a 1:1 ratio.
This sample size is enough for testing on one test tile and a few small pieces.
Start with 1:1 water-to-powder ratio.
Sieve thoroughly.
Add small amounts of water to refine thickness as needed.
Important:
Mix the entire dry bag at once — because the glaze is blended by hand, ingredients are not fully uniform until the full mix is slurried.
Yield example:
500 g (≈ 1.1 lb) of dry glaze = approx. 800 ml (≈ 27 fl oz) liquid glaze.
Apply an even layer. Suitable for:
• dipping
• brushing
• spraying
• pouring
• Do not ingest.
• Wear gloves when mixing or applying.
• Keep away from eyes; rinse thoroughly if contact occurs.
• Avoid breathing glaze dust; never sweep dry powder.
• Clean dried glaze with a wet cloth only.
• Ensure good ventilation during firing.
